The flume mold has been used in farmland for many years, and the effect is very good. In the past, when we used to irrigate, we used to irrigate the specific farmland. Because the production technology was not developed in the past, there was no alternative irrigation method. However, with the improvement of living standards and technology, this kind of irrigation method became more and more troublesome. Moreover, when watering, the water would still flow The effect of irrigation can not be improved and water resources will be wasted if the infiltration is not conducted. Therefore, the irrigation methods need to be updated and developed. Later, the drainage channel mold came into being. The drainage channel produced by him was also widely used in the construction of farmland irrigation, and the effect was very good. The products produced by drainage channel mould are all used on the surface of farmland. When we conduct actual irrigation, we have specified special water channel, so when we conduct irrigation, the effect is very high, because there is a certain water pressure, and the water flow of steel mold products of drainage channel is very large, and the cement product does not leak water, we can reduce it Less waste of water resources.
The mould of water channel can be disassembled. In order to ensure the tightness of the mould, the head of Lefeng mould selects high-quality bolts to reinforce the mould. In this way, the raw materials will not leak due to the poor rice powder property of the mold, and the waste of raw materials can be avoided. In the mold production, only several processes are required, first cutting and then Welding, and then the whole mold grinding smooth, highway isolation pier mold raw material steel plate, steel plate toughness is strong, in order to improve the use efficiency of the mold, our factory will make it can be assembled structure, so the water tank mold in the production of prefabricated parts production method will be very simple, the production speed will be much faster.