There is no doubt that the use of gutter mold is a good news for road traffic construction, because in normal transportation, the bigger problem is the impact of water on the road environment, which is more obvious on the city road. If the road water is serious, it is likely to affect the travel of vehicles and the safety of residents, so it is imperative to drain the water on the road 。 The drain mould solves this problem for us. If the concrete drain made by it can fully play its role, then it can keep the city road clean and dry, and its wettability will be reduced. It is the infrastructure in the municipal construction, so we also need to ensure the quality of concrete, usually its hardness and specification are specified, so Products mixed in proportion are more reliable.
The drainage channel mold is divided into two layers, the outer part is generally rectangular, and the inner part is designed as a U-shaped structure. This design method makes the modular drainage channel mold more convenient in use, and the outer part of the rectangle can increase the volume of the prefabricated parts of the drainage channel, and the inner part of the U-shaped can better collect the water together for transportation, but in practical application, each block should be drained The gap between the prefabricated parts of the groove shall be filled with cement, so that when the water is transported to the drainage groove, it will not seep into the underground through the joint. Compared with the traditional manually dug groove, such concrete drainage groove has a great difference in water consumption in terms of the speed of farmland irrigation. First of all, from the perspective of drainage speed, it is very fast because of the prefabricated drainage The surface of the prefabricated parts produced by the groove mould is flat, which will not produce resistance in the process of water flow transportation. Therefore, the speed of water flow is very fast. In addition, its significance is that the permeability performance can guarantee the water quantity in the groove, so the use of the prefabricated parts of the drainage groove can not only ensure the irrigation efficiency, but also reduce the waste of fresh water resources, and can also collect the rainwater when the rain is abundant, The collected rainwater can be used as farmland irrigation water, which plays a role of collection.